For screen reader problems with this website, please call480-503-34004 8 0 5 0 3 3 4 0 0Standard carrier rates apply to texts.

Sign Up for Our Monthly Newsletter Today!

SurgeX Rack Mount Surge Eliminator and Power Conditioner

Model #: SX-1115-RT
362710
SurgeX
At a Glance

The SurgeX SX-1115-RT and SX-1120-RT rack mount products offer comprehensive power protection and conditioning to safeguard AV equipment from harmful electrical transients that can cause malfunction and downtime. They allow technicians to turn equipment on or off remotely for quick reboots that can reduce service calls.

Call for Best Price
$99,999.00Save $NaN

Get to know this product.

  • Remote turn-on
  • Thermal circuit breaker overload protection
  • Self-test circuit with visual indicator
  • Magnetic shielding steel enclosure
  • Non-sacrificial components
  • 9’ grounded 3-wire cord

Featuring Advanced Series Mode technology, they eliminate all surge energy to make sure the connected equipment is protected from surges, spikes, electrical transients and noise. They do not produce ground contamination or common-mode disturbances that cause hissing sounds and pixelation on AV equipment.

SurgeX’s 360 degrees of advanced power protection also encompasses catastrophic over/under voltage shutdown, inrush current elimination, and impedance tolerant noise filtering to ensure equipment stays up and running without disruption and the power quality remains consistent.

SurgeX offers the highest level of protection to guarantee equipment receives clean power and functions properly.

Specifications

General

Load Rating15A
Voltage Rating120V
Power Requirement (No Load)15 W
Surge Let-Through Voltage (6000 Volt Surge)0 Volts
Maximum Applied Surge Voltage6000 Volts
Maximum Applied Surge CurrrentUnlimited (due to current listing)
Maximum Applied Surge EnergyUnlimited (due to current listing)
Endurance (C62.41-1991 category B3 Pulses)1 KV > 500,000; 3 KV > 10000; 6 KV > 1000
Under-Voltage Auto Shutdown90V
Over-Voltage Auto Shutdown145V
Over-Current Auto ShutdownCircuit Breaker
Auxiliary Relay Outputs2 x Screw Terminal
Contact Closure Input2 x Screw Terminal
Dimensions1.75" H x 19" W x 10.5" D
Weight11 lbs
Temperature Range5C to 35C
Humidity Range5% to 95% R.H. Non-Condensing
Agency ListingsConforms to UL Std 1283 and 1449, Certified to CSA Std C22.2 No.8

Misc. Specs

Product Weight (lbs.)11
Depth (in.)10.5
Width (in.)19
Height (in.)1.75
Number Of Outlets9
WarningProposition 65 Warning for California Residents